Get your Flex SUPER PNP with the FrSky Tandem MX Receiver INSTALLED and ready to bind!
Take your Flex SUPER PNP experience to the next level with our latest receiver installation option. With this upgrade, we’ll handle everything: soldering the connectors onto the receiver, installing your receiver and mounting securing antennas in 90-degree orientation, updating your Aura AFCS system to the latest firmware, and setting it up to work seamlessly with your FR Sky receiver.
All you need to do is program your transmitter with the settings provided in your Flex Super PNP instructions, bind, and get ready to fly! This streamlined process means more time in the air with less hassle on the ground.
We offer the TW Mini Receiver installed on the following Super PNP airplanes:
Overview
The Tandem dual-band receivers are unlike any other FrSky 2.4Ghz or 900Mhz receivers, they work simultaneously at both 900Mhz and 2.4Ghz frequencies. That means Tandem receivers provide not only the low latency signal and long range control, also benefits from enhanced level of high reliability and anti-interference performance. The Tandem series receivers adopt the triple antenna design that provides multi-directional wide coverage for the remote signal. The 900Mhz antenna is a newly designed small form factor, but has the equivalent high-performance as with previous 900mhz antennas. TD MX offers 4 PWM channels on a small and lightweight board, and it also has multiple ports onboard like SBUS Out, S.Port and FBUS. With the FBUS protocol, the Tandem series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the builds setup. In addition, the data (Power & Signal related) under unusual status during the flight can be recorded by Tandem receivers through the built-in black-box function.
Features
- Simultaneous working dual-band TD mode
- Triple antenna design for multi-directional coverage
- Black Box function
- 4ms Race Mode with Telemetry
- Long control range
- Over-The-Air (OTA) FW update
- 4 PWM channels
- S.Port (with the FBUS protocol)
- SBUS Out
Specifications
Input voltage: | 3.5 – 10.0V |
Band: | 2.4GHz & 900MHz |
Compatible Transmitters | All FrSky ACCESS /ACCST D16 transmitters |
2.4G Antennas | IPEX4 |
900Mhz Antenna: | Newly designed Antenna |
Width: | 0.83″ (21mm) |
Length: | 0.98″ (25mm) |
Weight: | 0.25oz (7.1g) |